Ga door naar hoofdinhoud

iPhone 12 mini 打开步骤

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 8 handleidingen die deze stap bevatten.

Stap 5
iPhone 12 mini Opening Procedure, Heat the bottom edge of the phone: stap 0, afbeelding 1 van 1
Heat the bottom edge of the phone
  • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

  • Heating the bottom edge of the iPhone helps soften the adhesive securing the display, making it easier to open.

  • Use a hair dryer or a heat gun to heat the bottom edge of the iPhone for 90 seconds or until the screen is slightly too hot to touch.

  • Never leave your hair dryer in one spot for an extended period of time.

  • If you have trouble during the opening procedure, the adhesive most likely cooled down. Apply more heat to further soften the adhesive.

打开 iPhone 的显示屏会损害其防水密封。 在继续执行此步骤之前,请准备好更换密封件,或者如果你在不更换密封件的情况下重新组装 iPhone,请注意避免接触液体。

加热iPhone的底部边缘有助于软化固定显示屏的粘合剂,使其更易于打开。

使用吹风机热风枪加热 iPhone 的底部边缘 90 秒,或直到屏幕稍微热到无法触摸。

切勿将吹风机长时间对着同一地方加热。

如果在打开过程中遇到麻烦,粘合剂很可能会冷却下来。施加更多的热量以进一步软化粘合剂。请按照 iOpener 说明进行操作,以免过热。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.