Ga door naar hoofdinhoud

2018年13寸带Touch Bar的 MacBook Pro 触控板更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap 4
MacBook Pro 13" Touch Bar 2018 Trackpad Replacement, Heat the trackpad cable: stap 0, afbeelding 1 van 1
Heat the trackpad cable
  • Prepare an iOpener and lay it on top of the trackpad ribbon cable for about a minute, in order to soften the adhesive securing the trackpad ribbon cable to the top of the battery.

  • If you don't have an iOpener, use a hair dryer to warm up the cable instead. The cable should be warm, but not too hot to touch. Be careful not to overheat the battery.

准备一个 iOpener 并把它放在触控板带电缆的顶部大约一分钟,以软化粘合剂固定触控板带电缆到电池顶部。

如果你没有iOpener,用吹风机加热电缆代替。电缆应该是温暖的,但不要太热触摸。小心不要使电池过热。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.