Repareer je spullen Gemeenschap Winkel

2018年13寸带Touch Bar的 MacBook Pro 触控板更换

Engels
Chinees

Handleidingsbenodigdheden

Alle vooraf vereiste handleidingen moeten vertaald worden voordat deze vertaling volledig wordt beschouwd.

禁用自动重启

2018年款13寸 MacBook Pro 底壳更换

断开电池

Handleidingsinformatie

= Klaar = Onvolledig
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      '''To reassemble your device, follow the above steps in reverse order.'''
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some basic [[Troubleshooting Problems After a Repair|troubleshooting]] or search our [link|https://www.ifixit.com/Answers/Device/MacBook%20Pro%2013%22%20Touch%20Bar%202018|Answers community] for help.

      Stappen

      Stap 1 — 移除触控板接口

      使用T3 Torx 螺丝刀拆下两个1.8 mm 螺丝固定轨迹板电缆接口支架。

      Stap 2

      用一对镊子拆卸触控板电缆接口支架。

      Stap 3 — 断开触控板

      用一个撬棒将触控板的连接线从主板上直接撬开，从而断开触控板的色带线。

      Stap 4 — 加热触控板电缆

      准备一个 iOpener 并把它放在触控板带电缆的顶部大约一分钟，以软化粘合剂固定触控板带电缆到电池顶部。

      Stap 5 — 剥离触控板电缆

      小心地将触控板带线从电池上剥离，并将其推到一边。

      Stap 6 — 移除触控板螺丝

      使用T5 Torx 螺丝刀拆下十颗固定触控板总成的螺丝:

      Stap 7

      稍微打开显示器来访问触控板。

      Stap 8

      移除触控板组件。

      Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.