Ga door naar hoofdinhoud

打开手机步骤

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 10 handleidingen die deze stap bevatten.

Stap 4
Opening Procedure: stap 0, afbeelding 1 van 3 Opening Procedure: stap 0, afbeelding 2 van 3 Opening Procedure: stap 0, afbeelding 3 van 3
  • Heat an iOpener and thread it through the arms of the Anti-Clamp.

  • You can also use a hair dryer, heat gun, or hot plate—but extreme heat can damage the display and/or internal battery, so proceed with care.

  • Fold the iOpener so it lays on the bottom edge of the iPhone.

  • Wait one minute to give the adhesive a chance to release and present an opening gap.

  • Insert an opening pick into the gap under the screen and the plastic bezel, not the screen itself.

  • If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn.

  • Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you.

  • Skip the next three steps.

加热 iOpener 并将其穿过反向钳臂。

你也可以使用 吹风机热风枪 或热板,但过热可能会损坏显示屏和/或内部电池,因此请小心操作。

折叠 iOpener,使其位于 iPhone 底部边缘。

等待一分钟,让胶水软化并出现一个缝隙。

将三角撬片插入屏幕和塑料边框下方的间隙,而不是屏幕本身。

如果反向钳无法创造出足够的间隙,请对该区域施加更多热量并将手柄旋转四分之一圈。

一次不要旋转超过四分之一圈,并在每次旋转之间等待一分钟。 让反向钳和时间为您完成工作。

跳过接下来的三个步骤。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.