Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.
Stap 1 vertalen
Stap 1
Battery
-
Use an iOpener to loosen the adhesive beneath the battery. Apply the iOpener on the display for at least two minutes.
-
In the following step, only apply the spudger in the areas marked in red, which is where the battery adhesive is located.
-
Avoid the orange area where the display flex cable is running.
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.