Repareer je spullen Gemeenschap Winkel

Nintendo Switch Vervanging van het LCD-scherm

Engels
Nederlands

Handleidingsbenodigdheden

Alle vooraf vereiste handleidingen moeten vertaald worden voordat deze vertaling volledig wordt beschouwd.

Nintendo Switch Vervanging van het achterste paneel

Nintendo Switch Vervanging van de Micro SD kaartlezer

Nintendo Switch Vervanging van het warmteschild

Nintendo Switch Ontkoppelen van de batterij (vooraf vereiste handleiding)

Nintendo Switch Vervanging van het koellichaam

Nintendo Switch Vervanging van de hoofdtelefoonjack en gamekaartlezer

Nintendo Switch Vervanging van het scherm

Nintendo Switch Scheiding van het LCD-scherm en de digitizer

Handleidingsinformatie

= Klaar = Onvolledig
    Follow this guide to replace a damaged or faulty LCD panel on the Nintendo Switch game console. This procedure replaces just the LCD panel. To replace the LCD panel and the digitizer as a complete unit, follow our [guide|140021|screen replacement guide].
    '''Note:''' If the display glass is cracked or shattered, but the screen still works, you’ll need to [guide|140040|replace the digitizer] instead.
    The Switch uses JIS screws, but you can use a Phillips screwdriver in a pinch. Be very careful not to strip the screws. iFixit's Phillips bits are designed to be cross-compatible with JIS-style screws.
    '''Note:''' This procedure involves removing the shield plate and heat sink. The thermal paste will need to be cleaned off of both components—as well as the CPU—and reapplied before reinstalling the shield plate and heat sink.
    ***Note:*** If the display glass is cracked or shattered, but the screen still works, you’ll need to [guide|140040|replace the digitizer] instead.
    ***Note:*** When you remove the shield plate, you’ll need to replace the thermal compound between the plate and the heatsink. Since normal thermal paste isn’t designed to bridge large gaps, the closest replacement is K5 Pro viscous thermal paste. You will, however, need regular replacement thermal paste for the CPU.
    You can complete this repair without removing the heat sink and the game card reader, but it makes disconnecting and reconnecting the LCD panel ribbon cable much more difficult. Keep this in mind when you perform this repair.
    ***Note:*** This guide, and the part we sell, are compatible with the original Nintendo Switch model released in 2017, as well as the newer refreshed model released in 2019 (model numbers HAC-001 and HAC-001(-01), respectively).
      Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing.
      To reassemble your device, follow these instructions in reverse order.
      '''If your new LCD panel doesn’t work properly after you boot up the device, turn it back off and disconnect and reconnect the battery connector.'''
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Nintendo%20Switch|Nintendo Switch Answers community] for help.

      Stappen

      Stap 1

      Enkel het LCD-scherm blijft over.

      Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.