Repareer je spullen Gemeenschap Winkel

iPhone XR 电池更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Terug naar de handleiding
Engels
Chinees
Vorige stap

Stap 6 vertalen

Stap 6
iPhone XR Battery Replacement: stap 0, afbeelding 1 van 1

  • Remove the battery from the iPhone.

  • If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.

  • Reinstall the Taptic Engine and speaker before installing a new battery. This helps keep the battery aligned correctly during installation.

  • Before you adhere the replacement battery, temporarily reconnect the battery connector to the motherboard socket. This ensures that the battery is properly aligned in its recess.

  • Adhere the battery, disconnect it, and continue reassembling your device.

  • If your new battery doesn’t have adhesive preinstalled, refer to this guide to replace the adhesive strips.

  • Perform a force restart after reassembly. This can prevent several issues and simplify troubleshooting.

从电池的底部边缘抓住电池并将其从iPhone中取出。

在重新安装电池前，可以先将Taptic Engine和扬声器安装好，这有助于在安装过程中保持电池的对齐。

重新安装电池时，请参阅本指南以获取有关更换电池胶带的帮助。

在完成电池的重新安装后进行 强制重启，这可以最大限度的防止多个问题的发生，并且可以简化故障排除的流程。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.