Ga door naar hoofdinhoud

iPhone XR 电池更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 5
iPhone XR Battery Replacement, Alternative method to unstick the battery from the case: stap 0, afbeelding 1 van 2 iPhone XR Battery Replacement, Alternative method to unstick the battery from the case: stap 0, afbeelding 2 van 2
Alternative method to unstick the battery from the case
  • If any of the adhesive strips broke off and the battery remains stuck to the rear case, prepare an iOpener or use a hair dryer to heat the rear case directly behind the battery. This will help soften the adhesive.

  • Heat the iPhone until the rear case is slightly too hot to comfortably touch. Don't overheat the iPhone, or you may accidentally ignite the battery.

  • Flip the iPhone back over and thread a strong piece of string (such as dental floss or a length of thin guitar string) underneath the battery.

  • Wrap the ends of the string around a cloth (or wear gloves) to protect your fingers.

  • Pull the string from side to side in a sawing motion all along the length of the battery to separate the adhesive. This can take some time since the adhesive is slow to deform, but with patience it will come free. Do not deform or damage the battery.

  • If you choose to use pry tools to lift the battery out of the iPhone, use extreme caution or you may damage the ribbon cables or the wireless charging coil directly underneath the battery.

如果胶带脱落,而电池仍然粘在后盖上。此时你需要准备一台 iOpener 或热风机,对iPhone 的后盖直接进行加热。

仅需将 iPhone 加热至略有些烫手的温度即可,请不要让你的 iPhone 过热,这有可能导致意外点燃电池。

将 iPhone 翻转过来,在电池上方穿过一根结实的绳子(比如一段牙线或是吉他弦)。

戴上手套来保护你的手指不会被勒伤,亦可将绳子缠绕在某一工具上。

以锯切运动将绳子从一侧拉到另一侧以分离粘合剂。这可能需要一些时间,因为粘合剂变形缓慢,但一定要保持耐心,它最终一定会被分开。请勿让电池变形变形或损坏电池。

如果你选择使用撬棒将电池从iPhone中取出,请格外小心,否则可能会损坏排线或电池正下方的无线充电线圈。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.