Ga door naar hoofdinhoud

iPhone XR 电池更换

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap 4
iPhone XR Battery Replacement: stap 0, afbeelding 1 van 2 iPhone XR Battery Replacement: stap 0, afbeelding 2 van 2
  • Repeat the above steps to remove the remaining three adhesive strips.

  • Be sure to hold onto the battery as you remove the final strip, or it may fling out of the iPhone unexpectedly.

  • If you removed all of the adhesive strips successfully, skip the next step.

  • If the adhesive breaks off underneath the battery and can't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).

  • Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.

  • Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.

  • Be careful not to damage the ribbon cables or the wireless charging coil directly underneath the battery.

  • For an alternative method to unstick the battery, continue with the next step below.

重复上述步骤以去除剩余的三个拉条。

在取下最后一个小拉条时务必抓住电池,否则可能会意外地从iPhone中掉出来。

如果成功移除了所有拉条,请跳过下一步。

如果任何胶条在电池下面断裂而无法取出,请继续下面的下一步。

如果电池下方的粘合剂断裂并且无法恢复,请在电池边缘下方的断裂胶带区域滴几滴高浓度(超过 90%)的异丙醇。

等待大约一分钟,让酒精溶液削弱粘合剂。 使用撬棒扁平的一端轻轻提起电池。

不要试图用力撬出电池。 如果需要,再滴几滴酒精以进一步削弱粘合剂。 切勿用撬具让电池变形或刺破电池。小心不要损坏带状电缆或电池正下方的无线充电线圈。

如需另一种移除电池的方法,请继续执行接下来的步骤。

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.