Repareer je spullen Gemeenschap Winkel

iPhone XR 배터리 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Terug naar de handleiding
Engels
Koreaans
Vorige stap

Stap 6 vertalen

Stap 6
iPhone XR Battery Replacement: stap 0, afbeelding 1 van 1

  • Remove the battery from the iPhone.

  • If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.

  • Reinstall the Taptic Engine and speaker before installing a new battery. This helps keep the battery aligned correctly during installation.

  • Before you adhere the replacement battery, temporarily reconnect the battery connector to the motherboard socket. This ensures that the battery is properly aligned in its recess.

  • Adhere the battery, disconnect it, and continue reassembling your device.

  • If your new battery doesn’t have adhesive preinstalled, refer to this guide to replace the adhesive strips.

  • Perform a force restart after reassembly. This can prevent several issues and simplify troubleshooting.

iPhone에서 배터리를 떼어내십시오.

새 배터리를 설치하기 전에 Taptic Engine/탭틱 엔진 및 스피커를 먼저 설치하십시오. 이는 배터리를 설치할 때 올바르게 정렬하도록 돕습니다.

배터리를 설치할 때 이 안내서를 참조하여 배터리의 접착 스트립을 교체하십시오.

재조립 후 강제 재시작하세요. 이는 여러가지 문제를 방지하며 문제 해결을 단순화 합니다.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.