Repareer je spullen Gemeenschap Winkel

iPhone XR 배터리 교체

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Terug naar de handleiding
Engels
Koreaans
Stap 5
iPhone XR Battery Replacement, Alternative method to unstick the battery from the case: stap 0, afbeelding 1 van 2 iPhone XR Battery Replacement, Alternative method to unstick the battery from the case: stap 0, afbeelding 2 van 2
Alternative method to unstick the battery from the case

  • If any of the adhesive strips broke off and the battery remains stuck to the rear case, prepare an iOpener or use a hair dryer to heat the rear case directly behind the battery. This will help soften the adhesive.

  • Heat the iPhone until the rear case is slightly too hot to comfortably touch. Don't overheat the iPhone, or you may accidentally ignite the battery.

  • Flip the iPhone back over and thread a strong piece of string (such as dental floss or a length of thin guitar string) underneath the battery.

  • Wrap the ends of the string around a cloth (or wear gloves) to protect your fingers.

  • Pull the string from side to side in a sawing motion all along the length of the battery to separate the adhesive. This can take some time since the adhesive is slow to deform, but with patience it will come free. Do not deform or damage the battery.

  • If you choose to use pry tools to lift the battery out of the iPhone, use extreme caution or you may damage the ribbon cables or the wireless charging coil directly underneath the battery.

Vertaling hier toevoegen

접착 스트립이 끊어지고 배터리가 후면 케이스에 붙어 있으면 iOpener를 준비하거나 헤어 드라이기를 사용하여 후면 케이스 배터리 바로 뒤를 가열하십시오. 열은 접착제를 부드럽게 하는데 도움이됩니다.

후면 케이스가 편안하게 만질 수 없을 정도로 약간 뜨거워질 때까지만 iPhone을 가열하십시오. iPhone을 과열하지 마십시오. 실수로 배터리가 점화될 수 있습니다.

iPhone을 뒤집어 놓고 배터리 아래에 강한 줄 (치실 또는 얇은 기타 줄)을 끼워주십시오.

손가락을 보호하기 위해 줄 끝을 천으로 감싸거나 장갑을 끼십시오.

톱질 동작으로 배터리 길이를 따라 끈을 좌우로 잡아 당겨 접착제를 분리하십시오. 접착제는 느리게 변형되기 때문에 다소 시간이 걸릴 수 있지만 인내심을 갖고 견디면 떨어질 것입니다. 배터리를 변형시키거나 손상시키지 마십시오.

iPhone에서 배터리를 들어 올리기 위해 비집는 도구를 사용하는 경우 매우 주의하십시오. 주의하지 않으면 배터리 바로 아래의 리본 케이블 또는 무선 충전 코일이 손상될 수 있습니다.

+[title] Alternative method to unstick the battery from the case
[* black] If any of the adhesive strips broke off and the battery remains stuck to the rear case, [guide|11677|prepare an iOpener|new_window=true] or use a hair dryer to heat the rear case directly behind the battery. This will help soften the adhesive.
[* icon_caution] Heat the iPhone until the rear case is slightly too hot to comfortably touch. Don't overheat the iPhone, or you may accidentally ignite the battery.
[* black] Flip the iPhone back over and thread a strong piece of string (such as dental floss or a length of thin guitar string) underneath the battery.
[* icon_note] Wrap the ends of the string around a cloth (or wear gloves) to protect your fingers.
[* black] Pull the string from side to side in a sawing motion all along the length of the battery to separate the adhesive. This can take some time since the adhesive is slow to deform, but with patience it will come free. ***Do not deform or damage the battery.***
[* icon_caution] If you choose to use pry tools to lift the battery out of the iPhone, use extreme caution or you may damage the ribbon cables or the wireless charging coil directly underneath the battery.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.