Inleiding
This guide will walk you through replacing the LED at the bottom of the speaker.
Wat je nodig hebt
-
-
-
Push down and turn the top of the speaker clockwise. This will release the clips and expand the speaker.
Vraag FixBot
-
-
-
Use a #000 Phillips screwdriver to remove the four 1 mm screws from the bottom half of the speaker.
-
-
-
-
Flip the speaker over and use a #000 Phillips screwdriver to remove three 1mm screws . Unscrew these to unfasten the top.
-
-
-
Remove the now unfastened coverings to expose the internals of the speaker.
-
-
-
-
-
Desolder the three connections to the old LED to remove it from the board.
-
To reassemble your device, follow Steps 1-4 in reverse order.
Team
UMass Dartmouth, Team S7-G5, Julie Spring 2017 Lid van UMass Dartmouth, Team S7-G5, Julie Spring 2017
UMASSD-JULIE-S17S7G5
5 Leden
8 handleidingen geschreven
