Inleiding

Replace the dock connector on your iHome iP11, so you can play music and charge your battery once again. For help troubleshooting click the link to our troubleshooting page iHome IH11 Troubleshooting.

  1. Remove the two 9mm screws that hold on the dock connector with a Phillips #1 Screwdriver.
    • Remove the two 9mm screws that hold on the dock connector with a Phillips #1 Screwdriver.

    Voeg opmerking toe

  2. Pop the dock connector out of the iHome and gently pull the white plastic plug connected to the dock connector apart.
    • Pop the dock connector out of the iHome and gently pull the white plastic plug connected to the dock connector apart.

    • Remove the four 7.0mm screws with a Phillips #1 screwdriver.

    Voeg opmerking toe

    • Remove both of the black plastic pieces. They should easily slide off of the two guide holes in the circuit board.

    • The dock connector should now be exposed. You can now simply put your new dock connector in the old one's place.

    Where can. I find the. Pin out. For this. Connector

    Roy H - Antwoord

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Nick Knowles

Lid sinds: 19-04-13

18 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 14-9, Maness Spring 2013 Lid van Cal Poly, Team 14-9, Maness Spring 2013

CPSU-MANESS-S13S14G9

5 Leden

5 handleidingen geschreven

Where can I buy a replacement dock connector?

A Ross - Antwoord

Likewise, this guide isn't much good if it uses parts that are unavailable.

CJ Shumate - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 6

Altijd: 2,196