Ga door naar hoofdinhoud
Help

Braun mixer 418 Motor Replacement

Bewerken van stap 4 —

Stap type:

Sleep om te herschikken

Place the plier over the metal clip on the circuit board at the end of the brown wire.

Pull back the plier in the opposite direction of the circuit board while clamping the metal clip

Place the plier over the metal clip on the circuit board at the end of the blue colour wire and pull the plier back.

Remove the cord from the hub by pulling the white rubberish part upwards.

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.