Intro-historie: Oontz Angle 3 ULTRA 3.5mm Auxiliary Port Replacement

Toestel	Oontz Angle 3 ULTRA
Type	replacement
Thing	3.5mm Auxiliary Port
Title	Oontz Angle 3 ULTRA 3.5mm Auxiliary Port Replacement
Introduction	If your Oontz Angle 3 ULTRA speaker is playing faulty audio with a 3.5mm auxiliary cable, you may need to replace your speaker’s 3.5mm auxiliary port. This replacement guide will walk you through replacing the 3.5mm auxiliary port of your Oontz Angle 3 ULTRA Bluetooth speaker. For this guide, you will need a plastic spudger, a Soldering Iron, and Solder Wick or a Solder Sucker. Follow this guide to learn how to solder and de-solder connections. https://www.ifixit.com/Guide/How+To+Solder+and+Desolder+Connections/750
Time Required Min	30 minuten
Time Required Max	30 minuten
Imageid	Voor Na
Difficulty	Very difficult
Conclusion	To reassemble your device, follow these instructions in reverse order.
Author	Ian
Public	Nee

Handleidingsbenodigdheden

• #1 was empty maar is nu Oontz Angle 3 ULTRA Back Panel Replacement.

Gereedschap

Vlaggen

Stappen

Stap #: 1

Voor

Na