Repareer je spullen Gemeenschap Winkel
Word lid van de reparatiegemeenschap - Account aanmaken

ZCWA BR151 Water Tank Replacement

Inleiding

The ZCWA BR151’s water tank holds the water necessary for its mopping capabilities. If the device is leaking water, refer to the troubleshooting page for instructions on how to correct this. If the water tank of the ZCWA BR151 needs to be replaced, use this guide to do so. It is easy to access through the removal of only a few pieces. No tools are needed to replace or install the water tank. There are no difficult steps in these instructions.

  1. ZCWA BR151 Water Tank Replacement, Water Tank: stap 1, afbeelding 1 van 1

    • Turn off the device.

    Vertaal
    Vraag FixBot

  3. ZCWA BR151 Water Tank Replacement: stap 2, afbeelding 1 van 2 ZCWA BR151 Water Tank Replacement: stap 2, afbeelding 2 van 2

    • Remove the water tank by sliding the latch down with a finger and grasping the bottom of the water tank.

    • Pull it out.

    Vertaal
    Vraag FixBot
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 1 andere bijdrager

Kaitlyn Baltz

Lid sinds: 01/22/24

431 Reputatie

3 handleidingen geschreven

Medailles: 7

+4 andere badges

Team

Tennessee Tech University, Team 1-1, Pickering Spring 2024 Lid van Tennessee Tech University, Team 1-1, Pickering Spring 2024

TNTECH-PICKERING-S24S1G1

4 Leden

6 handleidingen geschreven

0Gids Commentaar

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 37

Altijd: 454