Word lid van de reparatiegemeenschap - Account aanmaken

Inleiding

Use this guide to replace a damaged or malfunctioning IR LED in the Roku XD 2050X remote control. To complete this guide, you will need to disassemble your remote and use a soldering iron to replace the LED.

Wat je nodig hebt

1. Stap 1 Remote Control Casing
  Take care when handling components. Circuit boards, soldering points, and other areas may have sharp points.
  
  Remove the battery cover.
  
  Remove the two AA batteries.
  Vertaal
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024
2. Stap 2
  Insert flat edge of spudger into seam between the top and bottom halves of the remote control.
  
  Gently twist the spudger to separate the top and bottom halves of the remote.
  Vertaal
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024
4. Stap 3
  Gently use the spudger to pry the circuit board loose.
  Vertaal
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024
5. Stap 4
  Using either end of the spudger, gently lift and remove the clear keypad backing.
  Vertaal
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024
6. Stap 5
  Using either end of the spudger, lift and remove the rubber keypad.
  Vertaal
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024
1. Stap 6 Remote IR LED
  Desolder the two contacts for the IR LED.
  
  Remove the IR LED from the circuit board.
  
  For help with soldering view the ifixit soldering guide.
  Vertaal
  
  Vraag FixBot
  
  Voeg opmerking toe
  
  1024