Repareer je spullen Gemeenschap Winkel

PlayStation 5 Optical Drive Laser Replacement

Inleiding

Follow this guide to remove and replace the laser on a PlayStation 5.

Before you begin, completely power down and unplug all cables from your console. Remember to follow general electrostatic discharge (ESD) safety procedures while repairing the console.

Wat je nodig hebt

  1. PlayStation 5 Optical Drive Laser Replacement, Remove the stand screw: stap 1, afbeelding 1 van 1

    • If your PlayStation 5 is in its vertical orientation, flip it upside down so the stand is facing up.

    • If your PlayStation 5 is in its horizontal orientation, skip to Step 6.

    • Work on a flat surface to prevent your PlayStation from falling over.

    • Use a coin or a flathead screwdriver to remove the 26.5 mm-long stand screw.

    Bewerken

  2. PlayStation 5 Optical Drive Laser Replacement, Remove the vertical stand: stap 2, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove the vertical stand: stap 2, afbeelding 2 van 2

    • Lift straight up to remove the stand.

    Bewerken

  3. PlayStation 5 Optical Drive Laser Replacement, Store the stand screw: stap 3, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Store the stand screw: stap 3, afbeelding 2 van 2

    • Insert the screw into the cubby on the bottom of the stand.

    Bewerken

  4. PlayStation 5 Optical Drive Laser Replacement, Cap the screw hole: stap 4, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement, Cap the screw hole: stap 4, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement, Cap the screw hole: stap 4, afbeelding 3 van 3
    Gereedschap gebruikt in deze stap:
    Tweezers
    $4.99
    Koop

    • Use a pair of tweezers or your fingernail to remove the cap from the cubby.

    • Use your finger to press the cap into the screw hole.

    Bewerken

  5. PlayStation 5 Optical Drive Laser Replacement, Close the cubby: stap 5, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement, Close the cubby: stap 5, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement, Close the cubby: stap 5, afbeelding 3 van 3

    • Twist the stand counterclockwise to close the cubby.

    Bewerken

  6. PlayStation 5 Optical Drive Laser Replacement, Remove the horizontal stand: stap 6, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove the horizontal stand: stap 6, afbeelding 2 van 2

    • If your PlayStation 5 is in its horizontal orientation, rest it on its face with the charging port facing up.

    • Lift the stand straight up to remove it.

    Bewerken

  7. PlayStation 5 Optical Drive Laser Replacement, Remove the right faceplate: stap 7, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the right faceplate: stap 7, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the right faceplate: stap 7, afbeelding 3 van 3

    • Flip the device over so that the USB and ethernet ports are on the left side from your perspective.

    • Lift up the corner of the faceplate to unclip it from the case.

    Bewerken

  8. PlayStation 5 Optical Drive Laser Replacement: stap 8, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement: stap 8, afbeelding 2 van 2

    • While lifting up the corner, slide the faceplate towards the bottom of the device.

    • Remove the right faceplate.

    Bewerken

  9. PlayStation 5 Optical Drive Laser Replacement, Pry up the grille: stap 9, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement, Pry up the grille: stap 9, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement, Pry up the grille: stap 9, afbeelding 3 van 3

    • Insert the flat end of a spudger underneath the grille and into the gap above the fan.

    • Lift up with the spudger to pry the grille away from the case.

    Bewerken

  10. PlayStation 5 Optical Drive Laser Replacement, Remove the grille: stap 10, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove the grille: stap 10, afbeelding 2 van 2

    • Lift the grille away from the case to remove it.

    Bewerken

  11. PlayStation 5 Optical Drive Laser Replacement, Remove the fan shroud screws: stap 11, afbeelding 1 van 1
    Gereedschap gebruikt in deze stap:
    Magnetic Project Mat
    $16.96
    Koop

    • Use a T9 Torx Security driver to remove the four screws securing the fan shroud to the case:

    • Two 23.3 mm-long screws

    • One 11.4 mm-long screw

    • One 31 mm-long screw

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your console.

    Bewerken

  12. PlayStation 5 Optical Drive Laser Replacement, Remove the fan shroud: stap 12, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove the fan shroud: stap 12, afbeelding 2 van 2

    • Lift the fan shroud straight up to remove it.

    Bewerken

  13. PlayStation 5 Optical Drive Laser Replacement, Remove the wire cover: stap 13, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the wire cover: stap 13, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the wire cover: stap 13, afbeelding 3 van 3

    • Insert the flat end of a spudger beneath the black wire cover and into the gap above the fan wires.

    • Pry only on the wire cover, not on the fan wires themselves.

    • Use the spudger to peel up the wire cover until you can grip it with your fingers.

    Bewerken

  14. PlayStation 5 Optical Drive Laser Replacement: stap 14, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement: stap 14, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement: stap 14, afbeelding 3 van 3

    • Use your fingers to peel off the wire cover.

    Bewerken

  15. PlayStation 5 Optical Drive Laser Replacement, Disconnect the fan: stap 15, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Disconnect the fan: stap 15, afbeelding 2 van 2

    • Use your fingers to grip the edges of the fan cable connector, and pull up to disconnect it from the motherboard.

    • Always pull cables by their connectors and not the wires themselves.

    Bewerken

  16. PlayStation 5 Optical Drive Laser Replacement, Remove the fan: stap 16, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the fan: stap 16, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the fan: stap 16, afbeelding 3 van 3

    • Lift the fan up and out of the case to remove it.

    Bewerken

  18. PlayStation 5 Optical Drive Laser Replacement, Remove the SSD cover: stap 17, afbeelding 1 van 1

    • Use a Phillips screwdriver to remove the 17 mm-long SSD cover screw.

    Bewerken

  19. PlayStation 5 Optical Drive Laser Replacement: stap 18, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement: stap 18, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement: stap 18, afbeelding 3 van 3

    • Use your finger to slide the SSD cover towards the top of the device to unclip it from the case.

    • Remove the SSD cover.

    Bewerken

  20. PlayStation 5 Optical Drive Laser Replacement, Remove the optical drive wire: stap 19, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove the optical drive wire: stap 19, afbeelding 2 van 2

    • Use your fingers to grip the edges of the optical drive cable connector, and pull up to disconnect it from the motherboard.

    • Always pull cables by their connectors and not the wires themselves.

    Bewerken

  21. PlayStation 5 Optical Drive Laser Replacement: stap 20, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement: stap 20, afbeelding 2 van 2

    • Use your fingers to grip the edges of the optical drive cable connector, and pull up to disconnect it from the optical drive.

    Bewerken

  22. PlayStation 5 Optical Drive Laser Replacement, Remove the tamper-evident sticker: stap 21, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the tamper-evident sticker: stap 21, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the tamper-evident sticker: stap 21, afbeelding 3 van 3
    Gereedschap gebruikt in deze stap:
    Tweezers
    $4.99
    Koop

    • Use a pair of tweezers to remove the tamper-evident sticker covering the remaining case screw.

    • If your PlayStation 5 hasn't been opened before, this sticker will be completely black. The pattern will appear after you remove it.

    • Technically, these are tamper-evident stickers—but don't worry—Sony can't legally void your warranty, as long as you don't damage anything. Have fun!

    Bewerken

  23. PlayStation 5 Optical Drive Laser Replacement, Remove the case screws: stap 22, afbeelding 1 van 1

    • Use a T8 Torx driver to remove the eleven screws securing the case:

    • Six 18.6 mm-long screws

    • Two 23.3 mm-long screws

    • Two 43.2 mm-long screws

    • One 7.3 mm-long screw

    Bewerken

  24. PlayStation 5 Optical Drive Laser Replacement, Remove the case: stap 23, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove the case: stap 23, afbeelding 2 van 2

    • Lift the case straight up to remove it.

    Bewerken

  25. PlayStation 5 Optical Drive Laser Replacement, Remove the optical drive ribbon cable: stap 24, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the optical drive ribbon cable: stap 24, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the optical drive ribbon cable: stap 24, afbeelding 3 van 3

    • Use the flat end of a spudger to press down on the optical drive connector's metal locking tab.

    • With the metal tab depressed, use a pair of tweezers to pull the blue pull tab directly away from the connector to disconnect the cable from the optical drive.

    • Pull only on the pull tab, not the cable itself.

    Bewerken

  26. PlayStation 5 Optical Drive Laser Replacement, Remove the optical drive: stap 25, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove the optical drive: stap 25, afbeelding 2 van 2

    • Lift the optical drive away from the device to remove it.

    Bewerken

  27. PlayStation 5 Optical Drive Laser Replacement, Remove screws from top cover: stap 26, afbeelding 1 van 1

    • silver screws: 4x M1.6 X 3.7mm, with 6.5mm head.

    • black screws: 9x M1.6 x 3.8mm.

    • Remove screws with Phillips #1 screwdriver.

    Bewerken

  28. PlayStation 5 Optical Drive Laser Replacement, Remove top cover: stap 27, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove top cover: stap 27, afbeelding 2 van 2

    • Lift off the top cover.

    Bewerken

  29. PlayStation 5 Optical Drive Laser Replacement, disconnect FFC cables and 2 wire lead: stap 28, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement, disconnect FFC cables and 2 wire lead: stap 28, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement, disconnect FFC cables and 2 wire lead: stap 28, afbeelding 3 van 3
    Gereedschap gebruikt in deze stap:
    Tweezers
    $4.99
    Koop

    • Gently pull the medium and narrow FFC flexes and the 2-wire lead from their sockets. Suitable tweezers (bent with points or straight blunt end) can be used to aid removal.

    Bewerken

  30. PlayStation 5 Optical Drive Laser Replacement, Remove screws from the PCB.: stap 29, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove screws from the PCB.: stap 29, afbeelding 2 van 2

    • Remove screws with Phillips #1 screwdriver.

    • black screws: 2x M1.6 x 3.8mm

    Bewerken

  31. PlayStation 5 Optical Drive Laser Replacement, Remove base plate: stap 30, afbeelding 1 van 1

    • Lift off the PCB and attached assembly from the metal plate.

    Bewerken

  32. PlayStation 5 Optical Drive Laser Replacement, Flip over: stap 31, afbeelding 1 van 1

    • Turn over the PCB and attached assembly.

    Bewerken

  33. PlayStation 5 Optical Drive Laser Replacement, Disconnect FFC cable and remove the PCB.: stap 32, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Disconnect FFC cable and remove the PCB.: stap 32, afbeelding 2 van 2

    • Unlatch the wide FFC socket.

    • Gently remove the wide FFC cable from the socket and set aside the PCB.

    Bewerken

  34. PlayStation 5 Optical Drive Laser Replacement, flip over the assembly: stap 33, afbeelding 1 van 1

    • Flip over the assembly.

    Bewerken

  35. PlayStation 5 Optical Drive Laser Replacement, Remove the screws from mechanism plate: stap 34, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove the screws from mechanism plate: stap 34, afbeelding 2 van 2

    • Use a Phillips #1 screwdriver to remove the screws.

    • black screws: 4x M1.6 x 3.8mm.

    Bewerken

  36. PlayStation 5 Optical Drive Laser Replacement, Remove the mechanism plate: stap 35, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the mechanism plate: stap 35, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the mechanism plate: stap 35, afbeelding 3 van 3

    • Remove the mechanism plate and set aside.

    Bewerken

  37. PlayStation 5 Optical Drive Laser Replacement, Remove the FFC cable from laser deck: stap 36, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the FFC cable from laser deck: stap 36, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the FFC cable from laser deck: stap 36, afbeelding 3 van 3

    • Push down on the roller mech and remove the FFC cable from laser deck (near roller mech).

    • Blunt end straight tweezers can be used to aide removal of the FFC flex. To remove the flex from the socket, pull the flex towards the rollers.

    Bewerken

  38. PlayStation 5 Optical Drive Laser Replacement, Remove the screws holding the laser deck: stap 37, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove the screws holding the laser deck: stap 37, afbeelding 2 van 2

    • Remove the screws using a Phillips #1 screw driver.

    • silver screws: 4x M1.6 X 3.7mm 6.5mm head

    Bewerken

  39. PlayStation 5 Optical Drive Laser Replacement, Remove the laser deck: stap 38, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove the laser deck: stap 38, afbeelding 2 van 2

    • Remove the laser deck.

    Bewerken

  40. PlayStation 5 Optical Drive Laser Replacement, Remove the screws from metal plate over laser motor: stap 39, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove the screws from metal plate over laser motor: stap 39, afbeelding 2 van 2

    • Remove the screws from metal plate over laser motor.

    • Use a Phillips PH0 screwdriver to remove the screws.

    • silver screws: 2x M1.7 X 3.8mm

    Bewerken

  41. PlayStation 5 Optical Drive Laser Replacement, Remove the metal plate over the laser motor: stap 40, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove the metal plate over the laser motor: stap 40, afbeelding 2 van 2

    • Remove the metal plate covering the laser motor.

    Bewerken

  42. PlayStation 5 Optical Drive Laser Replacement, Remove the screws holding the laser motor to the drive deck: stap 41, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove the screws holding the laser motor to the drive deck: stap 41, afbeelding 2 van 2

    • Remove the screws holding the laser motor to the drive deck.

    • Use a Phillips PH0 screwdriver to remove the screws.

    • silver screws: 2x M1.7 X 3.8mm

    Bewerken

  43. PlayStation 5 Optical Drive Laser Replacement, Flip over and remove the screw from the white plastic bracket.: stap 42, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement, Flip over and remove the screw from the white plastic bracket.: stap 42, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement, Flip over and remove the screw from the white plastic bracket.: stap 42, afbeelding 3 van 3

    • flip over and remove a single black screw from white plastic bracket.

    • Note: laser motor will be loose, so be careful when you flip over the deck for the next step.

    • Remove the screw with a Phillips PH0 screwdriver.

    • black screw: 1x M1.4 x 3.9mm

    • Remove the white bracket and set aside.

    Bewerken

  44. PlayStation 5 Optical Drive Laser Replacement, Flip over the laser deck and move the laser motor to the side: stap 43, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Flip over the laser deck and move the laser motor to the side: stap 43, afbeelding 2 van 2

    • Flip over the laser deck and move the laser motor to the side

    Bewerken

  45. PlayStation 5 Optical Drive Laser Replacement, Remove the rod retention clip.: stap 44, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the rod retention clip.: stap 44, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement, Remove the rod retention clip.: stap 44, afbeelding 3 van 3

    • remove the clip that stops the rod from being removed.

    • a) Use a 1.5mm slotted screwdriver to push the lower end of the clip to the left, to unhook it from the retaining hook.

    • b) The clip should pop up.

    • c) lift out the clip.

    Bewerken

  46. PlayStation 5 Optical Drive Laser Replacement, Slide out the rod from the laser module.: stap 45, afbeelding 1 van 3 PlayStation 5 Optical Drive Laser Replacement, Slide out the rod from the laser module.: stap 45, afbeelding 2 van 3 PlayStation 5 Optical Drive Laser Replacement, Slide out the rod from the laser module.: stap 45, afbeelding 3 van 3

    • slide out the rod from the laser module.

    Bewerken

  47. PlayStation 5 Optical Drive Laser Replacement, Remove the laser module: stap 46, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Remove the laser module: stap 46, afbeelding 2 van 2

    • Remove the laser module

    Bewerken

  48. PlayStation 5 Optical Drive Laser Replacement, Flip over the laser module: stap 47, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, Flip over the laser module: stap 47, afbeelding 2 van 2

    • Flip over the laser module.

    Bewerken

  49. PlayStation 5 Optical Drive Laser Replacement, unlatch the FFC connector and remove the FFC flex from the laser.: stap 48, afbeelding 1 van 2 PlayStation 5 Optical Drive Laser Replacement, unlatch the FFC connector and remove the FFC flex from the laser.: stap 48, afbeelding 2 van 2

    • unlatch the FFC connector.

    • Remove the FFC flex from the laser.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our PlayStation 5 Answers community for help.

16 andere personen hebben deze handleiding voltooid.

Auteur

met 4 andere bijdragers

David Fear

Lid sinds: 06/10/17

408 Reputatie

1 Handleiding geschreven

Medailles: 9

+6 andere badges

4Gids Commentaar

Danke für die tolle und ausführliche Anleitung!

Discs werden wieder gelesen *freu*

Jan Bäumler - Antwoord

where do we get the replacement laser?

canegosh - Antwoord

Muchísimas gracias por la guía, me ha resultado imprescindible para hacer el cambio con éxito!

Pepe Paco - Antwoord

whats the name of the ribbon data cable that goes from this drive to the ps. The one taken off at the start before tearing down the bluray playe. Thanks

L2D2 - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 63

Afgelopen 7 dagen: 353

Afgelopen 30 dagen: 1,694

Altijd: 40,729