Repareer je spullen Gemeenschap Winkel

Microsoft Surface Pro 7 Kickstand Replacement

Inleiding

Follow this guide to replace the kickstand on your Microsoft Surface Pro 7.

Some photos in this guide are from a different model and may contain slight visual discrepancies, but they won't affect the guide procedure.

Wat je nodig hebt

  1. Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: stap 1, afbeelding 1 van 3 Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: stap 1, afbeelding 2 van 3 Microsoft Surface Pro 7 Kickstand Replacement, Open the kickstand: stap 1, afbeelding 3 van 3

    • Lift the kickstand to expose the hinge screws.

    Bewerken

  2. Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand screws: stap 2, afbeelding 1 van 2 Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand screws: stap 2, afbeelding 2 van 2

    • Remove the four 2.7 mm T3 screws—two on each side of the kickstand.

    Bewerken

  4. Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: stap 3, afbeelding 1 van 3 Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: stap 3, afbeelding 2 van 3 Microsoft Surface Pro 7 Kickstand Replacement, Close the kickstand: stap 3, afbeelding 3 van 3

    • Move the kickstand back down to a flat position.

    • The hinges are stiff and you may need to use some force to get it down.

    Bewerken

  5. Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: stap 4, afbeelding 1 van 3 Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: stap 4, afbeelding 2 van 3 Microsoft Surface Pro 7 Kickstand Replacement, Remove the kickstand: stap 4, afbeelding 3 van 3

    • Remove the kickstand from the back cover.

    • There are two adhesive tabs in the middle of the kickstand that disengage most easily when the kickstand is pulled directly downward from the device.

    • Be sure to insert these tabs when reinstalling the new kickstand before replacing the screws.

    Bewerken
Conclusie

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Één andere persoon heeft deze handleiding voltooid.

Auteur

met 1 andere bijdrager

Sam Omiotek

Lid sinds: 02/25/19

72.785 Reputatie

288 handleidingen geschreven

Medailles: 35

+32 andere badges

2 opmerkingen

One of the hinges broke on my Surface Pro 6.

1. I removed the broken hinge, closed the kickstand and duct taped the seam.

2. I opened the kickstand wide and duct taped the seam.

The single hinge and duct tape seem to be working!

"Spare the duct tape, spoil the job." - Red Green

P Best - Antwoord

What are the parts used for this fix?

Andrea Shaw - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 12

Afgelopen 7 dagen: 47

Afgelopen 30 dagen: 226

Altijd: 6,464