Inleiding
This guide will walk you through how to replace a faulty or wobbly kickstand on a Hover-1 Eagle scooter. You should replace your kickstand if your kickstand is defective, wobbly, or not the proper length. To determine if you need to replace your kickstand, refer to our Troubleshooting Guide.
Wat je nodig hebt
-
-
Remove the two 6mm axle screws using a hex bit 4.0.
-
Remove the kickstand from the scooter.
Vraag FixBot
-
-
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
2 andere personen hebben deze handleiding voltooid.
Team
Cal Poly, Team S1-G2, White Winter 2020 Lid van Cal Poly, Team S1-G2, White Winter 2020
CPSU-WHITE-W20S1G2
4 Leden
6 handleidingen geschreven
