Use a plastic spudger tool to remove the plastic frame. Insert the tool into the groove in the center of the top of the outer frame and lever it gently until it pops out. Insert the tool into the groove in the center of the top of the outer frame and lever it gently until it pops out.
  • Use a plastic spudger tool to remove the plastic frame.

  • Insert the tool into the groove in the center of the top of the outer frame and lever it gently until it pops out.

Voeg opmerking toe

Use a phillips head screw driver to remove all four screws in the corners around the screen. Set the screws aside for later. Set the screws aside for later.
  • Use a phillips head screw driver to remove all four screws in the corners around the screen.

  • Set the screws aside for later.

Voeg opmerking toe

Gently pull from both ends to separate the front panel from the back. Do not force the pieces apart wider than the length of the connecting wires or you will damage the wiring.
  • Gently pull from both ends to separate the front panel from the back.

  • Do not force the pieces apart wider than the length of the connecting wires or you will damage the wiring.

Voeg opmerking toe

Locate the white wire clip.  Gently unplug it using either your fingers or tweezers. Locate the white wire clip.  Gently unplug it using either your fingers or tweezers. Locate the white wire clip.  Gently unplug it using either your fingers or tweezers.
  • Locate the white wire clip. Gently unplug it using either your fingers or tweezers.

Voeg opmerking toe

Carefully expose both halves of the device.
  • Carefully expose both halves of the device.

  • Be sure to not pull the two halves apart too hard to avoid damaging the black wire.

Voeg opmerking toe

Locate the battery bracket and two screws. Remove both screws. Remove both screws.
  • Locate the battery bracket and two screws.

  • Remove both screws.

Voeg opmerking toe

Carefully peel the metal bracket away from battery. Pull the battery away from back cover. You may need to use a soldering iron and tongs to remove battery from the speakers.
  • Carefully peel the metal bracket away from battery.

  • Pull the battery away from back cover.

  • You may need to use a soldering iron and tongs to remove battery from the speakers.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Adrian Leon

Lid sinds: 07-10-10

169 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 22-1, Maness Fall 2010 Lid van Cal Poly, Team 22-1, Maness Fall 2010

CPSU-MANESS-F10S22G1

3 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 13

Altijd: 4,048