Inleiding
Here you will be removing several parts of the device to get to the USB port.
Wat je nodig hebt
-
-
Remove the four screws on the back of the GPS using the T5 Torx screwdriver.
-
-
-
-
Using a soldering iron, desolder the USB port connected to the motherboard.
-
Check out this awesome guide on how to solder and desolder connections.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
Één andere persoon heeft deze handleiding voltooid.