Inleiding
This guide requires you to use a soldering iron that can be dangerous if you do not know how to use it. I suggest looking at iFixit's Soldering Guide.
Wat je nodig hebt
-
-
Hold the remote control with the backside facing you and, using the Phillips #00 screwdriver, unscrew the six 6.5 mm screws on the back of the controller that hold it together.
Vraag FixBot
-
-
-
-
To remove the light, use a soldering iron to heat the solder to a liquid and loosen the leads.
-
While the solder is liquid, lightly pull on the LED to remove it from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team 1-6, Leahy Fall 2015 Lid van USF Tampa, Team 1-6, Leahy Fall 2015
USFT-LEAHY-F15S1G6
3 Leden
8 handleidingen geschreven
