Inleiding
Use when the USB port needs to be removed. (Soldering Required)
Wat je nodig hebt
-
-
Grip the dial tightly and pull straight off the device.
-
Repeat for the second dial
-
-
-
Insert a plastic opening tool into the seam between the rubber foot and plastic casing.
-
Pull the rubber foot free of the plastic casing.
-
-
-
-
Press the tip of a hot soldering iron to the USB connection to melt the solder.
-
Use a nylon spudger to lift the USB from the solder.
-
Repeat for each of the four USB connections.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
2 andere personen hebben deze handleiding voltooid.
4 opmerkingen
What port is used as a replacement?
Did you ever identify an appropriate replacement port?
Lepec -
something was broken out of the port of the USB connection
Will this method work with the 2015 tr mixamp?