Repareer je spullen Gemeenschap Winkel

This Nintendo DS Lite was released in 2006 as the successor to the Nintendo DS. Getting inside this device is simple, making for easy fixes.

321 Vragen Bekijk alle

Opties

Can EM10 be fixed with just a soldering iron?

Hi, I opened up a Nintendo ds lite to shell swap it and EM10 filter just isn't there, resulting in the ds not charing. My question is... Is it possible to replace this part with a simple soldering iron or is this too hard? What should I need? Soldering iron, braid, flux, and a very fine tip? I'm a total beginner, so any directions and help would be very appreciated. Thanks!!

Block Image

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

Hi!

I successfully repaired this with a soldering iron many times.

You need:

  • Soldering iron (with a tiny tip is recommended)
  • Flux
  • De-soldering (copper) braid
  • Magnifier (recommended)

Please make sure that you take the time and be very carefull! It’s easy to damage the solder pads.

You can either replace the part (recommended) or either bridge the connections for the EM10).

The guide you need: Repairing a Nintendo DS that is not charging

Good Luck with the repair! If you have any questions, do not hesitate to ask!

Was dit antwoord nuttig?

Ja Nee
Score 4
Voeg een opmerking toe

Voeg je antwoord toe

Enerd zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 15

Altijd: 50