Repareer je spullen Gemeenschap Winkel

Repair guides and support for your LG TV.

1345 Vragen Bekijk alle

Opties

TV screen damage after disassembly?

I was given an LG 50UH5530 for free that had a backlight problem. I replaced the backlight strips ok, but now the picture on the right half of the screen isn't displaying greys correctly. Pure white shows up with slight red tint, black and even colors seem ok, but any mid-grey tones just show up as black. I swapped the ribbon cables to the driver boards and the problem stayed on the same side. Did I ruin the display while I was poking around in there, or is there additional troubleshooting I can do for this?

Block Image

^ Pure black/white ok, but greyscale all messed up

Block Image

^ meant to be pure grey screen

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

@kylemartin72918 that could still be a backlight issue if you got some "not so high quality" strips. It is also possible that this is related to issues with the driver boards. Check your voltages on the T-con board (use the big inductores to measure) since it is possible that your Gamma IC may be having issues. Of course, double check your work and make sure that all the diffuser sheets etc are properly installed etc.

Was dit antwoord nuttig?

Ja Nee
Score 1

1 Opmerking:

Thanks! I combed over everything and found a small crack in the panel. Not sure if it happened during or before my repair, but I think that's what did it.

door

Voeg een opmerking toe

Voeg je antwoord toe

Kyle Martin zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 23

Altijd: 23