Repareer je spullen Gemeenschap Winkel

Reparatie-informatie voor de Sony PlayStation 5 DualSense-controller. Modelnummer: CFI-ZCT1W FCC ID: AK8CFIZCT1

84 Vragen Bekijk alle

Opties

Playstation power button not working

I'm trying to become a bit of a hobbyist In repair and my friend has given me his ps5 controllers to try and fix. Two had stick drift which were very easy to repair. But this third controller is driving me insane. I have taken it to pieces. Cleaned everything yet the PS button in the middle never engages. I've cleaned all the contact. Checked the motherboard still nothing. I changed the battery which showed the charging light working but the PS button still didn't work. Is there a way to diagnose it? (every of a button works fine. I used steam controller test which is very good for me. It shows everything working fine except the PlayStation home button)

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

The culprits are: the button, the flex circuit sheet, the foam bar under the sheet, or the motherboard contacts. Try swapping out the circuit flex sheet with a known working one. Check the foam bit that presses the flex circuit up against the motherboard, if that foam is too squished or damaged it can cause loss of contact on any number of buttons. On the motherboard where the flex circuit presses onto the board check the graphite covered contacts and see if the trace is broken right where the conformal coating ends and the graphite begins. Even bits of filth can interfere, try a good (but gentle) cleaning of all the contacts with 91+% isopropyl.

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Calum Cooper zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 9

Afgelopen 30 dagen: 38

Altijd: 80