Rep: 13
2
i have a Honda Lawn Mower Hrr2169VKA. i had issues with it running so i decided to replace the Carburator, gas hoses, fuel shut off, the governor springs rods return linkage, fuel filter, all the gaskets on the card, spark plug, new gas 93 octane and 10-30 oil. it still runs rough and doesn’t like to start without carb cleaner in card to kick it on.
Is dit een goede vraag?
Rep: 782,5k
1,1k
893
2,3k
@scotttrainito sounds like you already have most of the common items replaced. your engines issue sounds like an ignition issue. I would check the ignition coil and set the air gap etc. to specs. Do a spark check and compression test. Clean the flywheel and coil as well. The only other thing I would do is to check the valves and set the valve clearance. Here is a quick manual for the Honda GCV145-170-200 which should essentially be the same as for your engine.
Repair Info GCV145 170 200GCV145 170 200
The SM is for the GC1600 which is a horizontal shaft engine. specs should essentially be the same. Honda GC160 GC190 GS190 Service Manual
Was dit antwoord nuttig?
Tyvm for the info
Ok it’s dark as hell out I can check tomorrow
@scotttrainito no problem Take your time. We'll be here. Can't cut the grass in the middle of the night anyway :-)
I just ordered an ignition coil. For 20.00 it can’t hurt to replace it.
I will set the air gap when it comes in using a business card.
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 12
Afgelopen 30 dagen: 49
Altijd: 204
@scotttrainito can you check what engine your mower has. It could be a GCV160 A0 S3TE (GJAPA) but just want to make sure. Does your engine have a flywheel brake lever?
door oldturkey03
Honestly don’t know what engine. It does not have a blade brake….
door Scott Trainito
@scotttrainito there should be a couple of weird numbers stamped into the engine block :-) That will be the engine number
door oldturkey03