Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

Only top half of the screen works for touch

I've got a situation where 100% of the LCD (iPhone 6s) works but touches are registered only on the top 50% of the screen, meaning I can turn off the phone but I can't unlock it. I was thinking of replacing the LCD but wasn't sure if this would actually fix the problem as it could also be a problem with something further down the chain. Thoughts on whether replacing the LCD assembly (including the digitizer) will solve the problem are appreciated.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

I am guessing that it is just an issue with the screen. It would most likely be fixed if you replaced it. Has the phone been water damaged at all? That is the only other thing I can think of that might mess up the screen without it being broken. If you are thinking of doing the repair by your self, make sure you test the new screen before you actually install it all the way to make sure that the issue was with the old screen and not a more internal issue. Good luck! :)

Was dit antwoord nuttig?

Score 1

1 Opmerking:

No water damage, it was in my laptop bag for awhile when it broke. I'm guessing that because the digitizer is part of the screen that perhaps it is only partly broken. I'm going to open it up to look. Thank you for the thoughts.

door

Voeg een opmerking toe

Adding a note that replacing the screen did fix everything. Nothing wrong with the internals.

Was dit antwoord nuttig?

Score 1

1 Opmerking:

Nice! I am glad it worked out!

door

Voeg een opmerking toe

Voeg je antwoord toe

David Siebecker zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 5

Altijd: 74