Repareer je spullen Gemeenschap Winkel

22 Vragen Bekijk alle

Opties

Boot loop after replacing main motherboard and flashing firmware

Hi there,

My Sony bravia kd55xd8005 stopped turning on about 6 months ago.

Last week I decided to start having a poke around to see if I could fix it. From what I read online at the time a lack of status led and screen turning on could have been either the power supply or the main board.

I removed the cable going from the power supply to the main board and the led panel lit up white, again reading online that suggests that it's the main board. So I replaced the main board.

The led indicator started glowing green and orange when I plugged it in and I could hear the original instal music (birds and a waterfall). Great! But no display.

I went back to Google and read flashing the firmware should fix it. So I tried that.

Now the Sony logo comes up the android icons come up and then it restarts. So I Google again, try factory resetting. No luck, reboots after 5s of the big ring coming up.

"Try updating firmware again by renaming file to update_package.api"

So here we are now, the update bar is getting about 1/5 of the way along before the TV restarts again, tries to boot normally, restarts and tries to update again.

Any idea what my next step should be?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

It is possible the f/w you have is not for that TV. BUT normally it is checked and the update rejected if it is wrong.

It is possible the board you have is not exactly the correct one. All numbers must match the old one.

It might be possible there is a wrong connection. Try as I may, I sometimes do that.

It may be possible the "new" board isn't totally functional. That happened to me once or twice.

It may be possible there is another problem.

Was dit antwoord nuttig?

Ja Nee
Score 1

1 Opmerking:

Thanks for the prompt reply, the board serial number matches so i don't think its a wrong board. I will see if i can find any other firmware from the sony website and I will have a look to see if any of the connections are loose.

Worst case i will get another board, the one i got did come with a warranty so i will go have another prod haha.

door

Voeg een opmerking toe

Voeg je antwoord toe

Robert Cormack zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 9

Afgelopen 30 dagen: 34

Altijd: 1,348