Rep: 13
1
It’s a model # M5011 and when turning on the computer gives a normal boot tone and the hard drive is working but the screen is white with white lines. All capacitors on the motherboard were replaced and cleaned. It came with the ROM and all RAM slots filled.
Update: I have replaced both the Q1(2N3904) ic and U1(74LS38) ic no changes occurred.
Is dit een goede vraag?
Rep: 36,9k
150
91
50
The fact that you're getting a chime (and not a "chime of death") should indicate that the ROM and RAM chips are okay, but you could remove some of the RAM to rule out the possibility of a bad stick that isn't getting caught during the startup check.
Display issues on these machines can usually be attributed to the analog board, how to the capacitors, connections, and other chips look on that?
Was dit antwoord nuttig?
The RAM strips are using tin connectors. Clean those since corrosion can cause all kinds of errors.
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 4
Afgelopen 30 dagen: 7
Altijd: 452
2 opmerkingen
The battery on the logic board was replaced, correct?
door Andrew S
yes the battery was replaced before the caps were.
door Codedream