Repareer je spullen Gemeenschap Winkel

Multifunction wireless inkjet printer (scan/copy/fax), released 2013 from Canon. Identified by the "MX922" on the front of the machine, above and to the right of the "Canon" logo.

9 Vragen Bekijk alle

Opties

Ghosting only on blacks, colors are okay

My Canon Pixma MX922 has a print ghosting problem only on the two black inks. Colors look good. Canon recommends cleaning the encoder/timing strip with IPA. I have done this multiple times with no performance change. Any ideas what the cause could be? Would a bad print head do this? Do I need to disassemble the printer to access and clean the encoder/timing read sensor?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1
1 Opmerking

Hi @damon10 ,

Just curious if it does this when printing or scanning using the printer control panel or from a computer or both?

door

Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

@damon10 yes, a partially clogged print head could be the issue. Check on here how to clean it

Was dit antwoord nuttig?

Ja Nee
Score 1

1 Opmerking:

I did throughly clean the print head. It did not fix the issue. I can try that again. It just wastes ink that has flowed from the ink cartridges into the reservoir of the print head. A few other people posted this same issue on Canon’s support sight. Canon’s response was clean the timing strip, which didn’t fit it for us.

door

Voeg een opmerking toe

Voeg je antwoord toe

DTG zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 8

Altijd: 614