Repareer je spullen Gemeenschap Winkel

Repair information and guides for the iPhone 8 that was released on September 22, 2017. Model: A1863, A1905

873 Vragen Bekijk alle

Opties

Home Button not working even after replacements

My wife dropped her iPhone 8 and there was no visible damage but the home button stopped working. I tired a soft reset, hard reset, factory reset, and firmware update. These did not work, so I replaced the home button with no results. So I tried replacing the entire screen along with a home button that I knew worked from use on another phone. Nothing is working and it is becoming extremely frustrating. Is there another part that I need to replace? Maybe the charing port assembly? (some call it the dock assembly?)

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

Firstly you cannot change a home button on the iPhone 8. It will not work at all. Try putting the original home button on your new screen if you haven’t already.

If this also fails you will need to take it to apple if you want your touch ID back or you could purchase a (Universal home button) it will work the same as an original one but without the touch ID.

Was dit antwoord nuttig?

Ja Nee
Score 1

2 opmerkingen:

Not at all? Even if I don't care to lose Touch ID? I replaced one on my 7 plus no problem. Just lost Touch ID, but the home function itself works on the 7 Plus.

door

Apple locks their home buttons to the motherboard so if your original home button doesn't work then touch ID is definitely out. In my experience it is a hit or miss with getting the home button to click again depending on the part you buy.

door

Voeg een opmerking toe

Voeg je antwoord toe

Michael Malambri zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 3

Altijd: 63