Can you buy the connector which goes on the logic board for the battery charging regulator. I still have the solderings visible but the connector popped off when removing the cable.
Is dit een goede vraag?
Rep: 479,4k
35
329
971
Sadly, you really need to try to salvage the old connector as I don’t have a source for this connector. The only way I would fix this would to salvage the connector from a parts system.
I think you need to find someone who fixies Mac’s to have them replace it if they have the part.
Was dit antwoord nuttig?
Found the part number as J6951 from Aliexpress 10 pin
@yetiman17 - Good find!
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 1
Altijd: 159
1 Opmerking
Its best to post a few nice pics so we can see which part and the damage. Take a pic of the area of the connector so we can ID which one and take a nice tight shot of the pad area of both the logic board and the connector.
With this information we might be able to tell is the connector can be reused as well as what you'll need for a replacement and lastly, if repairs are needed on the logic board. Voeg afbeeldingen toe aan een bestaande vraag
door Dan