After falling down the display is distorted. Connecting external screen provides full functionality. The hinge on the right side has more movement than one on the left side. Screen is holding up in any position and can be closed.
Is dit een goede vraag?
Rep: 480,2k
35
330
971
Ouch! The displays T-CON logic has failed. I bet you hit the bottom edge of the lid which is where the T-CON board is located in this series.
Sadly, the display is no longer made so all you’ll find is used displays and are becoming harder to find and also go for a pretty penny! Here’s one source 13” Retina MacBook Pro Display Assembly, Apple P/N 661-7014 But don’t wait to long as they tend to go quickly!
Here’s the guide to putting it in MacBook Pro 13" Retina Display Early 2013 Display Assembly Replacement
Was dit antwoord nuttig?
Thanks for the post and instruction!
@zk777 - Don't forget to accept the answer - Thanks!
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 8
Altijd: 115
2 opmerkingen
Can you post a few pics so we can see the damage Voeg afbeeldingen toe aan een bestaande vraag
door Dan
@danj
thanks for reaching out. I uploaded video and image.
door zk zk