Dear,
Circuit priming message loops at beginning, then straigth away E05 error and asking to restart the machine, I did few times without sucess.
I opened the machine, and I can`t see any leak.
Any recommendation please?
My coffee machine is Royal gran crema
Is dit een goede vraag?
Rep: 203,5k
2,8k
57
1,3k
Error code 05 means that the flow meter does not give a signal. Now you have to search: is the flowmeter blocked or broken? Or the water cannot pass through, e.g. because the heater or the pump is calcified. In Saeco Royal Pumpe austauschen the flowmeter can be seen in step 6, picture 2. Open the flowmeter and clean it, it's easy.
Was dit antwoord nuttig?
Afgelopen 24 uren: 7
Afgelopen 7 dagen: 43
Afgelopen 30 dagen: 185
Altijd: 7,121
1 Opmerking
Hi . The problem with E05 is generated of many SAECO coffee machine , I had this problem and I fixed it . See the video below and I am sure it will helps you .
https://youtu.be/0YR-xtacx1U
door KK-Pro