Rep: 23
3
1
Hi i am asking a question i don’t know the answer i have the same problem as above but no matter what i try i still can not get the keys to work remotely iám looking for the remote receiver / signal sensor the location of which no one can tell me come on all you clever people help me please ?? desperate !!!
Is dit een goede vraag?
Rep: 450,2k
11
367
1,4k
Hi @dangerous ,
Here’s the 2008-2011 Ford Focus Service Repair Manual + Wiring Diagrams
A quick check in the Electronic Feature Group > Multifunction Electronic Modules section of the manual shows the location of the Generic Electronic Module which replaces the central locking module along with some other modules that were separate modules before, but not the location of the radio receiver that sends the signals to it. (see p.419-10-2). Hopefully it may be in shown in another section of the manual.
Was dit antwoord nuttig?
Rep: 23
3
1
Hi After a long discussion with lot of people i decided to replace the receiver in the headlining but this did not cure the fault so then took the big decision to change the PCM/ Fuse Box but at to find a complete match the numbers at to be a complete right down to the letters on it and then reconfigure it to all the cars functions before i could reinstate the keys.
i have no idea what had gone wrong with the PCM like all electronic pieces of equipment they have a mine of their own ?? what a long job but glad it’s done.
Was dit antwoord nuttig?
Afgelopen 24 uren: 1
Afgelopen 7 dagen: 11
Afgelopen 30 dagen: 48
Altijd: 1,346
2 opmerkingen
@dangerous
What is the year model of the vehicle?
door jayeff
thanks for your post but focus is a 2008 so won’t work on my iám afraid to say , what iám looking for is the remote receiver that receives the signal from the keys and transfers it to the central locking module or the canbus ? so if there is anybody out there who come help please give me a shout ?
door brian salmon