Repareer je spullen Gemeenschap Winkel

iMac Intel 27" EMC 2309 (Late 2009, Core 2 Duo 3.06 or 3.33 GHz) ID iMac10,1, EMC 2374 (Late 2009, Core i5 2.66 GHz or Core i7 2.8 GHz) ID iMac11,1

467 Vragen Bekijk alle

Opties

Display connector broken and external monitor doesnt work

Hi,

I got an iMac from my uncle who tried upgrading to an ssd and broke the display connector while doing so. I cant get an external monitor to work and i am trying to install high sierra with my macbook onto the ssd and then hope that i can maybe get a picture onto the monitor. When turning on, the fans spin normally without any loud noises and i can hear the boot chime. Does anyone have an idea how to save the imac from being sold for parts?

Edit: So i know for sure that the imac imac works, it starts normally high sierra and I can log in (without seeing anything, but i can hear the sound it makes when pressing random keys) it just doesnt work with my monitor. I already did a pram reset but it still doesnt trigger my monitor.

I think it might be the graphics card? How can i confirm this without seeing anything?

Block Image

Block Image

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
1 Opmerking

Lets get a better idea of the damage. Post some pictures of the area as clear and sharp as possible post them here Voeg afbeeldingen toe aan een bestaande vraag

door

Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

Ouch! Not good!

The pads have been fully peeled off. You will need a new logic board to fix this as that would be the cheaper than having someone patch things together. As an example: 27” iMac - 2.66GHz i5 Logic Board

You still may need a new cable if its damaged as well.

Was dit antwoord nuttig?

Ja Nee
Score 0

11 opmerkingen:

Yeah i know, I don't want to buy a new logic board, but maybe there is a way to use an external monitor with the imac?

door

Sorry I have no better answer.

door

Can you take a look at the edited part of my post? Thanks for your help btw

door

The first time i started the imac up it showed up on the monitor, now it doesnt:/

door

I know! There must be a way... The logic board wiring to all a mess!

You'll need to re-wire all of the broken traces, not an easy task! You'll need access to the schematics and board view drawings and if you're lucky a week or so of work you should be able to recover your logic board. If you have the time the tools and skills that works! Or which is a lot faster and a sure thing replace the logic board.

door

6 commentaren meer tonen

Voeg een opmerking toe

Voeg je antwoord toe

Malsor Ramadani zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 87