Ga door naar hoofdinhoud

Repair and support for the controllers that shipped with the PS3. Released in November 2007 (Japan only) and 2008 (other countries), the six-axis lithium battery powered controller (CECHZC2) is straightforward to repair.

157 Vragen Bekijk alle

Dualshock 3 CECHZC2E A1 bad charge port

Hi, I need some help.

I couldn’t find any guides on the Internet on how to change the charge port on this specific motherboard and model of Dualshock 3. I add some photos so you can see it:

Block Image

Block Image

Block Image

Block Image

Thanks.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Hi Rufino,

It’s soldered on the motherboard!

You need to de-solder the old one and solder the new one back in. It’s not really difficult to do it, you just need to follow the solder points and remove the solder from it to get it out.

I could make a guide for you, for how to do it, when I receive one which has a faulty USB connector.

Was dit antwoord nuttig?

Score 2

8 opmerkingen:

Thanks for answering. But where are the solder points? I couldn't find them.

door

Could you make a picture of the backside of the USB connector? To add: I think it's on top side of the motherboard.

door

It's in the pictures I posted, you can see it here: https://d3nevzfk7ii3be.cloudfront.net/ig...

door

I meant the backside of the port on the front side of the motherboard! Sry!

door

3 commentaren meer tonen

Voeg een opmerking toe

Voeg je antwoord toe

Rufino Serrano zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 10

Altijd: 257