Repareer je spullen Gemeenschap Winkel

Device repair and information for the Vizio D-series 50" LED television with model number D50n-E1.

77 Vragen Bekijk alle

Opties

Vizio 55" D Series TV Right side of screen has noise and distortion

When TV is reset it turns on, shows the Vizio signal, then will display the normal content on the left side (picture shows black in this area). One day the right half suddenly showed noise and distortion as show in the picture. This is a 55" 4K D Series TV. After a reasonably short amount of time, the TV turns off. Then when powered up again, the power indicator comes on (bottom left) then fades out and no image is shown at anytime on the screen. Will stay this way until unplugged for a short amount of time.

Model is D55U-D1

Block Image

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
1 Opmerking

Where can I get replacement PCBAs?

door

Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

@rookieman could be a T-Con board or LVDS cable issue. Most commonly this is caused by a failed LCD driver board which is part of the panel due to its bonding of the cables to the panel. I would at least try a different t-con board just to rule it out.

Was dit antwoord nuttig?

Ja Nee
Score 2
Voeg een opmerking toe

Opties

T-Con board did not solve the problem. However, replaced main video board (not panel), problem solved.

Was dit antwoord nuttig?

Ja Nee
Score 0

1 Opmerking:

When you say main video board do you mean the one where all of the HDMI ports go in? I have the same issue T-Con didnt fixit. your the only persion I found that had the same problem.

door

Voeg een opmerking toe

Voeg je antwoord toe

Dale zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 55

Altijd: 2,218