Ga door naar hoofdinhoud

iPod Classic 6th Generation. Model A1238 / 80, 120, or 160 GB hard drive / black or silver metal front

Help with Testing iPod Classic logic board with a multimeter

Guys I have a pristine ipod 80gb . It doesn't power on .

So far tested

Display works finne

Harddrive is fine

New Battery

Clickwheel is fine

Tried connecting to the wall charger without battery

I'm really tired need help solving this .

How do I test the board with a multimeter to check if it's shorted out or not

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Het nuttigste antwoord

@johnwick90 extremely difficult to do since there are no schematics for the iPod. You can check the 30 pin dock connector wiring and see if that is working properly. Check the battery connector on the board since that is a weak spot on those boards. Make sure it is connected properly etc.

Was dit antwoord nuttig?

Score 2

2 opmerkingen:

Thanks for replying I had seen your old post I had checked the fuse

The power management IC

USB port

Battery connector

All of them are fine. I just don't know what's wrong with the board

door

Check the coils around the power management IC's and battery connector

door

Voeg een opmerking toe

Voeg je antwoord toe

John zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 17

Altijd: 546