Repareer je spullen Gemeenschap Winkel

Repair and disassembly guides for Epson printer. The company was founded in 1942 as Daiwa Kogyo, Ltd., but merged with another company in 1959 to create Suwa Seikosha Co., Ltd.

624 Vragen Bekijk alle

Opties

My WF-3640 close cover sensor

When I turn the power on to my WF-3640 it starts beeping and flashing with message close cover then back to standby over and over never ending. I can shake it and it will work for a while then starts over. How do I access the sensor and clean it?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

@fredric2 sounds like issues with the “Cover Open Sensor”. Should be on the front lip of the top cover and may require a partial disassembly. This may come in handy. You are looking for something like this (different model of the WF shown)

Block Image

Was dit antwoord nuttig?

Ja Nee
Score 3

1 Opmerking:

Thankyou, oldturkey03. After looking at the picture and link you supplied I was able to locate and clean the sensor. The sensor for the WF-3640 is just left of center on the front edge of the frame. There is a post on the cover that moves the contacter back when closed.

door

Voeg een opmerking toe

Voeg je antwoord toe

Fredric zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 6

Afgelopen 7 dagen: 11

Afgelopen 30 dagen: 65

Altijd: 2,397