Repareer je spullen Gemeenschap Winkel

Model A1199 / 2, 4, or 8 GB capacity

85 Vragen Bekijk alle

Opties

Two small SMD passives knocked off the board when fixing water damage.

Hi all, I have a question about two small components on the logic board of an iPod 2nd Nano 2nd gen. There was some water damage inside it when I opened it, and I replaced caps on the other side that were damaged. However when I was working on the section right next to the battery solder joints, two tiny passive components got knocked off the board. I tried to find a schematic online for the board number 820-1995-A that’s listed on it, but I got nothing. Does anyone know what the values of these components are supposed to be, or have the schematic?

Block Image

Thanks,

Alec

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

@alecm schematics for any of the iPods are not available. The only way to determine the value etc. for those components is by measuring them on another board.

Was dit antwoord nuttig?

Ja Nee
Score 2

1 Opmerking:

I was afraid of that. If anyone has a board that they're willing to measure those component's values on, I would be very grateful :)

door

Voeg een opmerking toe

Voeg je antwoord toe

Alec M zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 51