Ga door naar hoofdinhoud

Find repair and additional information for the Whirlpool EV205FXKQ, an upright freezer with manual defrosting and a door for access, introduced in 2003. This page covers information for model numbers matching the pattern EV205FXKQ**.

1 Vragen Bekijk alle

making seal around door tight so does not ice up

The seal is not tight and the upright freezer door does not seal right. It ices up badly and really shortly after defrosting it. repairmen say is more expensive to replace seal than to buy a new freezer. Surely that is not right. I have cleaned the seal really good but you can see where it is not sealing when the door is shut. How do I fix that? Some type of glue or silicone like you use in bathroom around tub?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
2 opmerkingen

Hi,

What is the make and model number of the freezer?

door

I have a Whirlpool modelEV205FXKQ00

door

Voeg een opmerking toe

2 Antwoorden

Het nuttigste antwoord

If you stuff your freezer the way I do, there maybe something that’s holding it open slightly.

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Hi,

You most probably will have to replace the door seal (aka door gasket).

Here’s a link to the door gasket for your model taken from the door parts diagram from this supplier’s website. (door part #8)

It is only shown to give an idea of what it looks like and the cost of the part.

There are other suppliers online that may suit you better.

Just search for WP4-81049-001 to get results.

Not sure with your model whether the gasket is held in by screws or it is a push fit into a groove.

There a videos on YouTube that show how to replace refrigerator door gaskets which may be of some help.

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Voeg je antwoord toe

sonyabrand zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 38

Altijd: 1,572