Ga door naar hoofdinhoud

De JBL Charge 2+ geproduceerd door JBL is de tweede generatie van de JBL Charge.

75 Vragen Bekijk alle

JBL Charge 2+ battery replacement troubles

so i replaced the battery on my charge 2 plus with the one listed on ifixit websiteJBL Charge 2 Plus Battery Replacement . when i plug it int to charge the battery it just flashes on the first battery light forever. so i reset the charge 2 by holding the phone and volume up button at the same time and now it turns on when plugged in and makes a really loud but deep beeping sound over and over even if its connect to my phone. Any help would be great.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
Voeg een opmerking toe

3 Antwoorden

Het nuttigste antwoord

Switch the polarities on the batteries (red+black wires)

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Switch red exterior wire with black exterior wire, and red interior wire with black interior wire. It worked well for me when replacing battery.

make sure wire colors match the previous battery

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

same thing happened to me. You can either disconnect or just snip and solder the wires as others have said. If you don't want to do that, there are actually two revisions of the Charge 2+. The first revision shares a battery with the charge2 as the ifixit part suggests (part #: GSP1029102). The 2nd version has the polarities of the battery reversed and has part number GSP1029102R (note the R at the end). Other vendors have this battery with the correct polarities for the 2nd revision charge 2+ if you aren't comfortable reversing the wires.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Rob zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 13

Altijd: 295