Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

Connect to iTunes if motherboard damaged by screws? BACKLIGHT ISSUE

Hi:

I admit I may have damaged an iPhone 6 motherboard by mistakenly placing a slightly longer screw there at the display cable shield (after replacing the display). There is no display function at all. But I know the phone is still alive as pressing the power & home buttons (saved original home button) will cause the phone to vibrate. Even with the possible damage should the phone be recognized by iTunes when connected to my computer? I just want the owner to be able to download their data.

Thanks!

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

2 Antwoorden

Het nuttigste antwoord

There is many issues that you have to insert password and trust to connect.Yes PC detect the phone but you can`t enter password,So i think without solving the long screw you can`t connect to PC anymore.

Was dit antwoord nuttig?

Score 1

1 Opmerking:

OK… Thanks for your response.

Would using a 1.65mm screw in place of a 1.2mm result in the damage? From just and extra 0.4mm? Is it possible to remove the screw post to repair a trace in the board? I have made SMD circuit boards and have a hot air rework station to use. Any other suggestions to save the phone?

door

Voeg een opmerking toe

Hi:

I now realize the LCD/Display is working, it is the back-light that is not. No motherboards damage due to the screws! Now on to how to fix the back-light problem.

THanks!

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Tom zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 102