Repareer je spullen Gemeenschap Winkel

Reparatiehandleidingen voor beeldschermen (of monitoren) van computers of andere apparaten met video-output.

505 Vragen Bekijk alle

Opties

AOC monitor power board

Hello,

I have a problem with an AOC q277PQU monitor. The screen is black (no osd or image) while the led is green and usb ports are powered.

I was excpecting a dead capacitor on the power board, but the problem seems more serious.

Block Image

Block Image

I can’t find a spare for this power board, do you think it’s recoverable?

Thanks.

Block Image

Block Image

Block Image

Update (09/15/2019)

Thank you for your helpful answer @oldturkey03

I am disappointed becasue the 2 yr warranty is overshot by maybe 3 or 4 months, and it was a very decent screen for money.

Here are the labels on the panel:

Block Image

Block Image

Thanks

Update (09/15/2019)

Block Image

This little chip is just at the back of the burned zone.

Do you know what it is?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1
6 opmerkingen

Try ebay for a used part?

door

@Nathaniel Miller I cound't find one unfortunately

door

@ramaro that is a Schottky SK84 SMD Diode

Maximum Recurrent Peak Reverse Voltage 40V

Maximum RMS Voltage 28V

Maximum DC Blocking Voltage 40V

Cost ~1.00 USD maddening isn't it?

Go ahead and replace it and see what happens. At this time it can't cause any more damage and may actually work. Let us know how it is going.

door

Thank you very much @oldturkey03

door

@ramaro you are very welcome. Best of luck with your repair and let us know how it works out for you.

door

1 commentaar meer tonen

Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

@ramaro this will be tricky since there are no schematics etc. for this board and power boards for this monitor seem to be pretty hard to come by. Check for the part number 715G7760-P03-000-001S since some Acer’s use the same power supply. You can try and identify the components within the scorched area and replace those and hope it’ll work or you can consider a universal LCD driver for the monitor. That would require you to remove your power and main board and use a different setup for your panel. Not impossible but it’ll require some skills. It is still better than having to get a new monitor and condemning yours to the landfill. Let us know what the label on the back of your LCD panel says and we’ll find out if it could be done.

Update (09/15/2019)

@ramaro so it looks like the LCD boards may actually be available. Not cheap so, but cheaper than a new monitor. Your want to contact the vendor from here as well as this one and see if they can assist you with the N02.0 revision

Was dit antwoord nuttig?

Ja Nee
Score 2
Voeg een opmerking toe

Voeg je antwoord toe

Ramar zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 9

Afgelopen 30 dagen: 31

Altijd: 1,937