Ga door naar hoofdinhoud

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

2342 Vragen Bekijk alle

No Wi-Fi, Bluetooth Unavailable, No IMEI After water damage

Hi all,

The summer is here, and apperantley many people are going to swim with their iPhones HAHA :-p

After I cleaned iPhone 4 that had a water damage, now the device shows "no service", and No Wi-Fi, The is no IMEI in the "About" page, and bluetooth is Unavailable, and in the About page bluetooth shows: "00:00:00:00:00:00"

I read something about that I need to heat the Baseband chip? Where is this chip? What is it? How should I heat it?

I also read that I need to buy replacement ICs. What is it IC ?

I also tried few different batteries include a brand new one - But didnt help.

I also restore to the latest Firmware - 4.3.3.

Anybody has a suggestion?

This is the source of where I found the suggestions but didn't get some of the English :-

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score -1
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

ICs are Intergrated Circuits.

the part about the baseband chip is that they are talkign about reflowing it. if you are not 100% certain that you know what you are doing, i recommend leaving that step to a professional.

Chances are you need a new logic board.

Was dit antwoord nuttig?

Score 2



where can i find "ic" that you talk about?

please can you send it to my email?

many thanks!!

i have the same problem with my iphone 4


The iPhone baseband "IC" processor is the 3383 – Infineon X-Gold 61x Check this link, it's the only one that I have that "might " help you.


Voeg een opmerking toe

Put it on a hot radiator for a few hours

I always fix my water damaged phones this way

put a cloth under the phone and turn the radiotor in your home full on for 2hrs then try it.

Was dit antwoord nuttig?

Score 0




thanks for fast replay :)

i will put just the logic board on a how radiotor for 2 hrs.

and let you know what next.



Voeg een opmerking toe

Voeg je antwoord toe

Shai zal eeuwig dankbaar zijn.

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 7,981