Rep: 9
1
Basically, i have a stripped screw on the dock connector. I managed to remove the metal bracket but the screw, on the opposite side of the headphone jack, is still there. Do i need to remove it to get the logic board out?
Is dit een goede vraag?
Rep: 782,4k
1,1k
893
2,3k
Johan, yes you do need to remove that screw. Check on here I would either try to get a small jewelers screwdriver and try to make it fit or use a small dremel like tool to cut a groove into the screw head. Good luck.
Was dit antwoord nuttig?
Managed to get it out, using my mates Jewellers screwdriver kit, pretty hard work though xD
Cheers for your help
Rep: 1
1
I was able to remove it with a Sears screw removal tool that was sold on tv before They bought them up. they come in 3 sizes and the smallest size just did work. Then as above reslot it and it can be recycled.
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 1
Altijd: 1,782
