Ga door naar hoofdinhoud

Third generation Surface Pro tablet, released June 20, 2014.

123 Vragen Bekijk alle

Testing a Surface Pro 3 battery that has been removed.

How do I use a volt meter to check the battery ? It is disconnected from the motherboard but there are no obvious pos and neg points. The cable appears to split internally in to 2 halfs.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Hi John,

I am hypothesizing that the two halves are the main positive and negative terminals. Which one's positive, I'm not sure but it will just show up as negative voltage on your meter if swapped. I'm guessing the small traces near one split is either for sensing or individual cell charging.

BE CAREFUL not to short the battery with your leads!

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Voeg je antwoord toe

John Macauley zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 18

Altijd: 159